Self-clean cycle time length, Press, Display – Kenmore 790.45 User Manual
Page 37: Instructions, When the self-clean cycle is completed, Stopping or interrupting a self-cleaning cycle, Seif-cleaning, D-nn ri, N n „ u, 4'3u hot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Seif-Cleaning
The cooktop lockout Q feature will be activated during the self-clean and will unlock after the oven has cooled down.
Self-Clean Cycle Time Length
The FLEX CLEAN (n^ pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a
self
clean
cycle
remembeTfo
allow time for the oven to cool down and the oven door to unlock. This normally takes about
one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.
*lt is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for
heavy soils (to assure satisfactory results).
A CAUTION
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air or steam to escape.
PRESS
DISPLAY
A CAUTION
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY
HOT.
INSTRUCTIONS
To set the controls
for
a 3 hour Self-Cleaning cycle to
start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and the oven
door is closed.
Press (g). "CLEAN" will flash and "3:00" HR will show in the
display (Figure 1). The control will automatically clean for a 3
hour period (default self-cleaning cycle time). Note: If a 2 or 4
hour clean time is desired, press (g) (g) (g) for 2 hour or
press (g) (g) (g) for a 4 hour clean time. Set the cleaning
time based on the amount of soil: light, medium or heavy (* See
above).
2
.
D-nn ri _
J U U L t n
dXSXS)'^
( D ® ®
Figure 1
3. Press
■’"
start
. The "DOOR LOCKED" icon will flash; "CLEAN",
Q icon and the letters "CLn" will remain on in the display
(Figure 2).
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
n ri „
U Lun
I
Figure 2
n n „
u
llh
Figure 3
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the "DOOR
LOCKED" and "CLEAN" icon will remain in the display (Figure 4).
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" and Q icon is are longer displayed, the
oven door can then be opened (Figure 5).
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
1. Press
(
stop
2. The oven door can only be opened after the oven has cooled
down for approximately 1 HOUR and the "DOOR LOCKED" icon
is no longer displayed (Figure 5).
4'3u Hot
Figure 4
5:30
Figure 5
37