Kenmore 790.45 - Manual (Page 23)

Setting Convection Roast
This method of cooking enables you to obtain the best results when roasting. The oven can be programmed to
convection roast at any temperature from 170°F to 550°F (77°C to 288°C). Remember to use tested recipes with times
adjusted for convection roasting when using the convection mode. Times may be reduced by as much as 30% when
using the convection feature. This oven is equipped with multiple fan speeds for even cooking when baking and better
tasting meats when roasting. It will use a faster fan speed for roasting which will quickly strip the cold air away from the
meats replacing it with warm air (making a crisp outside type of searing) sealing in juices for better tasting meats.
Setting Oven Controls
INSTRUCTIONS
To Set the oven to Convection Roast at 375°F
1. Arrange oven racks.
2. Press (g|); "350" will be displayed; CONV ROAST will flash (Fig. 1 ).
3. Enter the desired roasting temperature using the number pads
4. Press START ; The actual oven temperature will be displayed,
CONV ROAST and the fan icon will be displayed (Fig. 3). The Bake,
Broil and Convection elements will also cycle for better heat
distribution.
To Change the Convection Roast temperature
(example: changing from 375°F to 425°F)
1. Press (g^; "375" will be displayed; CONV ROAST will flash (Fig. 2).
2. Enter the desired roasting temperature using the number pads
® CD CD c^'g-4)-
PRESS
/Convx
CBoasjt/
(DCDCD
START
DISPLAY
l'3u 35u
Figure 1
Figure 2
inn^
I L J L I
/Conv Vi
C±)CDCD
START
Figure 3
I
Figure 4
30 435'
3. Push START ; the current oven temperature, CONV ROAST and
the fan icon will be displayed.
After the oven has reached the desired temperature, the control will beep and CONV ROAST light will stay on. Note:
The Bake, Broil and Convection elements will cycle for better heat distribution. When convection roasting is complete
press
Setting Convection Convert
The CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking.
When set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may ONLY be used with a Conv Bake, Timed Conv Bake or a Delay Start (Delayed Timed Conv
Bake) setting. When used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert
will display a “CF” for check food when the bake time is 75% complete (See Fig. 8). At this time the oven control will
sound 3 long beeps at regular intervals until baking had finished. When the bake time has completely finished the
/tonv\
C^pnveTi
control will display "End" and will sound 3 long beeps every 30 seconds until the pad is pressed.
To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F normal bake
recipe to a convection bake recipe)
When the conv bake mode is on at 400°F (Figure 6), press fcgvp-
"CONV BAKE" and the oven temperature adjustment will appear
briefly in the display (for this example it is 375°F) (Fig. 7) then the
actual oven temperature will be displayed. A beep will sound once the
adjusted oven temperature is reached. The display will show “375°”,
"CONV BAKE" and the fan icon (Fig. 7). NOTE: When using a Cook
Time, the convection convert will not operate if you have a timed bake
under 20 minutes.
23
nn' (SA
U U ^
Figure 7
30 СЯ
Figure 8