Instructions, Press, To set the bake temperature to 375°f – Kenmore 790.45 User Manual
Page 20: To change the bake temperature (example: changing, Display, Dcdcd, 30 m35, Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The BAKE (Bake) pad controls normal baking. If preheating is necessary, referto the (S) Preheat Feature for
instructions. The oven can be programmed to bake at any temperature from 170° F to 550° F (the sample shown below
is for 350° F).
INSTRUCTIONS
Setting Oven Controls
Setting Bake
PRESS
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
Press (Bake), "350" Will appear and "BAKE" will flash in the
2
.
3.
4.
display(Figure 1). If a bake of 350°F is needed, press
start
\
Press
CK^ (Figure 2). "BAKE" will continue to flash
and "375°" will appear in the display.
Press START The actual temperature will be displayed (Figure
3). A beep will sound once the oven temperature reaches 375°F
and the display will show "375°" and "BAKE" (Figure 4).
Pressing (sro^ will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F
to
425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press (Bake)
(Figure 5) and "375" will appear and "BAKE" will flash in the
display.
2. Press
(Figure 6). "BAKE" will continue to flash
and "425°" will appear in the display.
3. Press
START .
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for better heat
distribution.
CDCDCD
START
(DCDCD
START ;
DISPLAY
I
Figure 1
Figure 2
D n inn“
D u l u u
Figure 3
Figure 4
:30 3
m
Figure 5
Figure 6
30 M35'
20