Instructions, To activate the oven lockout feature, To reactivate normal oven operation – Kenmore 790.45 User Manual
Page 17: Press, Si^for3, Seconds, Display, Setting silent control operation, For 7 seconds, Setting oven lockout feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note: Adjustments to the Oven Lockout, Temperature Display, and Silent Control Operation features will not affect
cooking results.
Setting Oven Lockout Feature
The
pad
controls
the
Oven
Lockout
feature.
The
Oven
Lockout
feature
automatically
locks
the
oven
door
and
prevents the oven from being turned on. It does not disable the clock. Kitchen Timer or the interior oven lights.
Setting Oven Controls
INSTRUCTIONS
To activate the Oven Lockout feature
1. Press and hold
(
stop
)
for 3 seconds.
2. After 3 seconds
"Loc"
will appear, a beep will sound and
"DOOR LOCKED"
will flash in the display. Once the oven door
is locked the
"DOOR LOCKED"
indicator will stop flashing and
remain on along with the
"Loc"
(Figure 1).
To reactivate normal oven operation:
1.
Press and hold for 3 seconds. A beep will sound. The
"DOOR LOCKED"
will flash in the display until the oven door
has completely unlocked (Figure 2).
2.
The wall oven is again fully operational.
PRESS
(si^for3
seconds
(si^for3
seconds
DISPLAY
LOC
Figure 1
Figure 2
Setting Silent Control Operation
The
DELAY TIME
and
FLEX CLEAN
(a^ pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
PRESS
DISPLAY
for 7 seconds
Figure 3
INSTRUCTIONS
To change control
from
normal sound operation to
silent control operation
1.
To tell if your range is set for normal or silent operation press
and hold (^). will appear and
"DELAY"
will flash in the
display (Figure 3). After 7 seconds
"SP"
(Speaker) will appear
in the display. (Figure 4)
2.
Press to switch between normal sound operation and
silent operation mode. The display will show either
"SP"
(Figure 4) or (Figure 5).
If
"SP"
appears (Figure 4), the control will operate with normal
sounds and beeps. If appears (Figure 5), the control is in
the silent operation mode.
3.
Press START to accept the change or press to reject the
\
start
or
Figure 5
change.
Note:
The control will always beep at the end of a kitchen timer period, and will beep when a set temperature has been
reached, even if the control is set to silent operation.
Figure 4
17