Electrical system check, Caution, Electrical system check -38 – Kenmore 153.335963 User Manual
Page 37: Troubleshooting guide (cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting Guide (cont’d)
ELECTRICAL SYSTEM CHECK
(Use diagram on page 36)
▲CAUTION
Label all wiring before disconnecting any wiring; to ensure
correct reconnection. Failure to follow this instruction
could cause improper and possible dangerous operation,
resulting in DEATH, SERIOUS BODILY INJURY, OR
PROPERTY DAMAGE.
No
Visually
check
chat
all
components
are
wired
correctly
according
to
wiring diagram on unit.
Yes
Correct by wiring according to dia-
Pilot is lit and thermostat is calling
gram.
j
1
for heat.
Go
to
Thermostat
and
Gas
Supply
Check section.
Check
at
#1
for
110/120
volts
to
ground.
No
No
No
No
h..
No
Yes
No
No
T
Yes
Does
power
cord
or
power
wiring
have
110/120
volts available (recep
tacle and/or junction box)?
1
Yes
Í
Is on/off switch “ON”?
I
Yes
;
Blower motor is running.
Check
at
#2
for
110/120
volts to
ground.
Yes
_L
Unplug blower motor and check at
'
#3
for
110/120
volts to ground.
1
Yes
Replace blower motor.
Yes
continued on facing page
37