Kenmore 1T6.31100 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOSE AND WAND

1. Insert the tab on
the telescopic wand
into the “J” slot on
the hose handle.
Twist the telescopic

wand to lock In

place.

2. Place the telescop

ic wand In the wond
holder and route the
hose as shown.

3. Snap the

hose handle

into the hose

holder locoted

on the handle
of the vacuum
cleaner.

NOTE!

Be sure

the raised

edge of the

hose handle
rests against

edge of the

hose holder.

4. Rotate the

hose release
lever down

and route the

hose as

shown,

5. Snap the

hose Into the
hose cuff on
the side of

the vacuum

cleaner

6. Rotate the hose
release fever
upwards to lock

the hose in place.

CAUTION

Do not operate the agltotor without the

wond properly inserted into the wand
holder ond the hose hondle properly
secured in the hose holder