Assembly instructions, A warning, Handle – Kenmore 1T6.31100 User Manual
Page 6: A caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special aHenfion to these hazard alert boxes, and follow any
instructions given, WARNING statements alert you to such hozards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
A WARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in eletrical shock or
injury.
Before ossembllng the vacuum cleaner,
check the PACKING LIST. Use this list to
verify that you have received □!! the
components of your new Kenmore
vacuum cleaner.
HANDLE
A
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without Ihe screw in place.
1. Remove the handle screw from the
body of the vacuum cleaner.
1.
Position the handle assembly as shown
in the illustration.
3, Using a screwdriver, tighten hondle
screw.
NOTE: It may be necessary to adjust the
handle slightly.