Warning – Kenmore 1T6.31100 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO REMOVE CLOG FROM HOSE
1. Rotate the extension hose release lever
counter-clockwise to release extension
hose.
Extension
Hose
Release Lever-
2. Remove the lower end of the extension
hose from the wand holder by grosplng
the hose collar, twisting, and pulling
straight up.
3. Plug in the vacuum cleoner and turn it
on.
4. Stretch the extension hose to maximum
length and then allow the hose to return
to its natural length.
5. Re-Insert the hose into the original
storage position from which it was
removed. Press firmly to assure
connection.
6. Rotate hose release lever clockwise to
the locked position.
WARNING
Personal Injury Hazard
DO NOT place hands or feet under
neath the vocuum cleaner at any
lime.
If the dust bag, filter áreos and the hose
areas are free of clogs, disconnect the
nozzle hose from the wand holder and
check the nozzle for clogging.
Clean the agitator according to the
instructions in the AGITATOR CLEANING
section.
Return the vacuum cleaner to the upright
position before plugging into an electrical
outlet.
20