Dust bag cover replacement, Agitator cleaning, Clog removal – Kenmore 1T6.31100 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DUST BAG COVER REPLACEMENT
To reinstall or replace dust bag cover.
1, Align dust bag cover hinge pin with
hinge pin hole In dust container.
2, Rotate dust bag cover into place,
3, You should hear
a
noticeable click
when hinge pin snops into place.
I?)
I
AGITATOR CLEANING
To maintain efficient cleaning, the agita
tor must be kept free of carpet fiber,
string, or hair build-up. After every 7 to
10 uses, unplug and turn vacuum cleaner
over and check agitator for fiber and
hair bolld-up.
Use scissors to remove any build-up
entangled around the agitator.
CLOG REMOVAL
Always follow oil safety precautions when
performing maintenance to the vacuum
cleaner.
A WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
the vacuum cleaner suddenly starting.
If the vocuum cleaner does not seem to
have adequate suction, first check if the
dust bag is full or if a filter Is clogged.
See DUST BAG REPLACEMENT section.
If the dust bag and filter areas are free of
clogs, check the extension hose.
19