Kenmore 1T6.31100 - Manual (Page 10)

RELEASING THE HANDLE
Release the handle by pressing down on
the handle releose pedal with your foot
and pulling back and down on the handle
with your hand.
Nolet The agitator does not rotate when
the vacuum cleoner is in the upright posi­
tion.
OFF/FLOOR/CARPET SWITCH
To start the vacuum cleaner, slide the
OFF/FLOOR/CARPET switch from the OFF
position to the FLOOR or CARPET position
A CAUTION
Refer to your carpet manufacturers
cleoning recommendations. Some more
delicote carpels may require that they
be vacuumed with the agitator turned
off, to prevent carpet damage.
To stop the vacuum cleaner, slide the
ON/FLOOR/CARPET switch to the OFF
position.
CAUTION
Do not allow vacuum cleaner to remain
In one spot for any length of time when
the agitator is turning. Damage to car­
pet may occur.
OFF - turns both
suction and
brush motors off.
FLOOR - turns
on the suction
motor only. In
this position the
brush assembly
does not
revolve. Use
this setting for cleaning hardwood ond file
floors and when ony attachments (tools)
are used.
CARPET - turns on both the suction and the
brush motors.
Note! The agitator does not rotate when
the vacuum cleaner Is In the upright posi­
tion.
10