Dust bag repiacemint, A warning, To remove dust bag – Kenmore 1T6.31100 User Manual
Page 17: A caution, To replace dust bag, Dust bag repiacemint a warning, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DUST BAG REPiACEMiNT
A WARNING
Always
unplug
power
cord
from
electrical
outlet
before
performing
maintenance
to
the
vacuum cleaner.
TO REMOVE DUST BAG
Dusi Bag
Cover Latch
1. Poll on the
dust bag cover
latch located
on the side of
the dust bag
cover.
NOTE: This unit has a bag safely stop
which prevents cover from closing if bog
is missing or not properly installed. Do
not puli ort the bog safety stop when
removing/installing the dust bag.
2, Grosp the
dust bag collar
and pull
gently,
carefully
removing the
dust bag from
the dust bag
holder.
Dost Bag
Holder
Dust Bag
Chamber
Motor
Safety
Filter
3. Throw oway
the used dust
bag. Do not
reuse dust bag.
4. Check the
dust bag holder
and the motor
safety filter for
dirt or clogs.
A
CAUTION
NEVER REUSE A DUST BAG. Very fine
moleriols, such os carpet freshener,
face powder, fine dusf, plaster, soot,
etc. can clog the bag and cause It to
burst before it is full. Change bag
more often when vacuuming these
materials.
TO REPLACE DUST BAG
Dust
Bag
1. Unfold the
new dust bag.
Fold the safety
seal tab on the
new dust bag
away from the
opening that
fits on the bag
support.
Note: See PARTS AND FEATURES for
Bag number.
Sofofy
Seal Tab
ÿ
n.
2, Push dust bag
collar opening
completely over
the dust bag holder
as far as it will go.
3. Tuck
the bag
into
the dust bag
chamber.
Be
sure
the bottom and
sides of the dost
bag are completely
within bag
covity
prior
to closing the
Dag
cover.
4. Close the bag
cover. You will
hear a distinct snap
when cover is
securely closed.
Check to see that
the dust bag is fully
placed in the bag
chamber.
NOTE: If bag is not installed or not
installed properly the bag safety stop
prevents the cover from closing.
М7