Kenmore 1T6.31100 - Manual (Page 12)

ATTACHMENTS
^CAUTION
DO NOT üse the hose when vacuum cleonBr
handle is iHfod bock tnlo the floor cleaning
position.
Always return the vaccom cleaner to the
upright position before using the hose and
attachments,
Faiiure to do so may result in overheating of
the agitator motor and can cause the thermo!
protector to trip
TO USE ATTACHMENTS
T. Place the vacuum cleaner in the
upright position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Hose
3. Use attachments as needed. See
ATTACHMENT USE TABLE.
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
CAUTION
When using attachments, be careful not to
overextend the stretch hose when reaching.
Trying to reoch beyond the hose stretch
capability could cause the vacuum cleaner
to tip over.
A CAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Property damage or
personal injury could result.
TELESCOPING WAND
1. The wand length
Is adjustable ancf
requires no
assembly. To adjust,
simply push down
on the wand handle
and slide the upper
wand to the desired
height.
2. Extend wand to
desired length.
COMBINATION BRUSH
The combination brush can be attached
directly to the wand.
Brush
Combination
Brush
Brush
Holder
Use the brush holder without the brush
for greater suction on furniture cushions
or stairs.
Use brush holder with brush for cleaning
loose surfocBS such as drapes.
12