Self-cleaning, Stopping or interrupting a self-cleaning cycle – Kenmore 790.7946 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Cleaning
•
Setting Flex Clean
•
Setting Delay Flex Clean
INSTRUCTIONS
When the Self-Clean cycle is done:
1. The time of day, "DOOR LOCKED" and "CLEAN" icon will
remain in the display.
2.
Once the oven has cooled down for approximately 1 HOUR, and
the
"DOOR LOCKED'" icon is no longer displayed, the oven
doorcan then be opened.
PRESS
DISPLAY
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press (s^.
2.
Once the oven has cooled down for approximately 1 HOUR and
the "
DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (See Fig. 7).
Fig-7
IMPORTANT NOTES when using the Self-Clean feature:
1
. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle may be started if the appliance has the
Cooktop Lockout active. A Self-Clean cycle cannot be
started if
Oven Lockout feature is active.
3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Cleaning cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 19 for instructions to set the control for
the
24 hour time of day display mode.
32