Kenmore 790.7946 - Manual (Page 17)

Setting Oven Controls
• Oven Lockout
• Setting Temperature Display
OVEN
LOCKOUT
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the
Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Timerorthe interior oven light.
INSTRUCTIONS
To activate the Oven Lockout feature:
1. Press and hold for 3 seconds.
2. After3 seconds a beep will sound, Loc will appearand "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing. (See Fig. 1)
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will sound. Loc will
clear. The "DOOR LOCKED" will continue to flash until the oven
door has completely unlocked (See Fig. 2).
PRESS
stop )
for 3 seconds
DISPLAY
3 n ( nr
U L U L
Fig.1
stop )
for 3 seconds
Fig. 2
2. Theovenis fully operational.
Setting Temperature Display — Fahrenheit or Celsius
The BROIL and FLEX CLEAN pads control the FahrenheitorCelsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit (F) or Celsius (C) press
(See Fig. 3) and hold for? seconds; "550°" will first
appear in the display and then a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(See Fig. 4). If "C" appears, the display is set to show
temperatures in Celsius (See Fig. 5).
Press (a^} to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (See Fig. 4) or "C" (See
Fig. 5).
Press to accept the change or press to reject the
change.
PRESS DISPLAY
Broil ) for 7 seconds
■ j n r r n
J U D D U
2
.
3. START J or (STOP
Fig. 5
17