beautypg.com

Instructions, Press, Cdcd®)' ^'9- 5) – Kenmore 790.7946 User Manual

Page 22: When the set bake time runs out, 3 xt)( 5, Display, P-po, I j n, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

The

BAKE (

ba

^, OVEN COOK TIME

and

DELAY START pads control the Delay Start feature. The

automatic timer of the

DELAY START feature will turn the oven ON and OFF at the times you select.

INSTRUCTIONS

To program the oven for a Delay Start and to shut off
automatically (example for baking at 350°F for 50

minutes and starting at

5:30}:

1. Be sure that the clock is set with the correct time of day.

2. Arrange interior oven rack(s) and place the food in the oven.

Setting Oven Controls

• Setting Delay Start

Setting Delay Start

PRESS

3.

4.

5.

Press (g) (See Fig. 1)

Enter the desired baking time using the number key pads by

pressing

(See Fig. 2). Note: Baking time may be

set for any amount of time from 1 minute to 11 hours and 59

minutes.

Press (See Fig. 3).

Press

(See Fig. 4).

7.

Enter the desired start time using the number pads

CDCD®)' ^'9- 5)

8

. Press

. (See Fig.

6

)

9.

Press

. (See Fig. 7)

10

11

.

Press

(See Fig.

8

)

Note: Once

Delay Start has started, press

to display the

bake time remaining. Once the

Delay Start has started baking, a

long beep will sound when the oven temperature reaches the set
temperature.

Press when baking has finished or at any time to cancel the

Delay Start feature.

When the set bake time runs out;

1. "End" will show in the display. The oven will shut off

automatically (See Fig. 9).

2

. The control will beep 3 times. The control will continue to beep 3

times every 30 seconds until (^) is pressed.

5 X 3 )( 0

(g)

3

XT)(

5

DISPLAY

Fig. 2

Fig. 4

5:30

Fig. 5

I j n

^

4

MP

tmJ

Fig. 6

I j n

I J U

Fig. 7

l in D1C°

I JU J O

Fig. 8

P-PO

E n

Fig. 9

NOTE: If your clock is set for normal

12

hour display mode the

Delay Start feature can never be set to start more than

12

hours in advance. To set the

Delay Start 12-24 hours in advance see page 15 for instructions to set the control for the 24

hour time of day display mode.

22