Kenmore 385.115518 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Applique
/■ — —
Set the Machine
Stitch selector
Top
thread
tension
control 1 to 4
Stitch
length
0 to 24
Satin stitch foot
Baste (or fuse with iron-on fabric
joiner} applique pieces on the fabric.
Stitch around the applique making
sure the needle falls along the outer
edge of the applique.
When sewing corners, lower the needle
down into the fabric. Raise the presser
foot and pivot the fabric to the right
or left.
• Bar Tacking
This stitch is similar to a very short
satin stitch and is used to reinforce
points of strain such as corners or
pockets and straps on lingerie.
Sew 4 to 6 zigzag stitches.
27
This manual is related to the following products: