Kenmore 385.115518 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
determines the stitch you select, but
also regulates the stitch width for
regular zigzag and rick rack stretch
stitches.
The different types of stitches are
designated by color.
Straight, Zigzag and Three-Step Zigzag
(Mode! 11551 only) are orange.
Straight Stretch (Models 11551 and
11541), Rick-Rack Stretch (Models
11551 and 11541) and Smocking
Stretch (Model 11551 only) are gold.
Buttonhole
Settings
(Model
11551
only) are blue.
NOTE: To avoid needle or fabric
damage, be sure your needle
is up and out of fabric when
adjusting this control.
length of the stitch.
The higher the number, the shorter the
stitch.
0 means no feed.
Control should be in the detent posi
tion between S and L ( ▼ position) for
most materials. Depending upon the
type of fabric used, you may need to
adjust this control to match forward
stitches of stretch sewing with reverse
motion stitches. To shorten stretch
stitches, turn the control slightly to
ward "S". To lengthen, turn toward
"L".
Smocking stretch
troi during sewing.
Release to sew forward again.
Rickrack stretch
18