Assembly instructions, Warning, Wands – Kenmore 116.25513 User Manual
Page 6: Power-mate, I ft
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, electric shock, burns
and personal injury. CAUTION statements alert you to such dangers as personal
injury and/or property damage.
[
ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate Repair Parts List. Use this list
to verify that you have received all the com
ponents of your new Kenmore vacuum
cleaner.
WANDS
Button
I ft
y
Slide wands together
until wand button
snaps into place. Turn
wand button to the
slotted area of the
wand swivel.
The swivel allows you
to turn the handle to
the left side to reach
farther under low fur
niture.
Power-Mate®
1. Insert wands into Power-Mate* until the
wand button snaps into place.
2. Connect Power
Mate* plug and
cord as shown. DO
NOT force. Raised
area of plug must
be toward hand.
3. Secure cord into
the cord holder on
the wand swivel.
To remove: Step on wand quick release
pedal, then pull up on wands.
Upper
Wand
-
Wand
Button
Wand
Smvel
Lower
Wand
_
t
---------
Wand
__I
Button
Wand Quick
Release Pedal