Exhaust filter changing, Warning, Exhaust filter – Kenmore 116.25513 User Manual

Page 15: Hepa

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXHAUST FILTER CHANGING

WARNING

Fire and/or Electrical Shock Hazard

Do not operate with a clogged
exhaust rilter or without the exhaust

filter or exhaust filter cover installed.

EXHAUST FILTER
HEPA

The exhaust filter cartridge must be
replaced when dirty. Replace the filter when
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.

NOTE: See PARTS AND FEATURES for

exhaust filter number.

1. Pull out and
up on the
exhaust filter
cover to remove

from the vacuum

cleaner and lay
aside.

Exhaust
Fitter

2. Pull the exhaust
filter up and out
from the rear of
the vacuum

cleaner.

3. Replace the
exhaust filter
cartridge.

Place the new

filter into the

vacuum cleaner

with the foam
seal facing
towards the vacuum cleaner.

Exhaust
Filter

Tabs

4. Replace the

exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on

the vacuum

cleaner and
rotate into place

until it snaps

closed.

This manual is related to the following products:

116.25512