Power-mate® care, Warning, Belt changing and agitator cleaning – Kenmore 116.25513 User Manual
Page 16: To remove belt, To clean agitator, Important, Power-mate* care
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER-MATE® CARE
Always follow all safety precautions when cleaning and servicing the Power-Mate*
A
WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
3. Turn Power-
Mate^ right side
up. Press handle
release pedal
and lower the
swivel. Lift rear
iatches up.
i-
5. Lift agitator
assembly out
and remove
worn belt.
6. Check and
clean end cap
areas. See
AGITATOR
ASSEMBLY
for picture of
complete
agitator assembly.
1. Turn Power
Mate® upside
down.
2. Unscrew the
two (2) Power
Mate® cover
screws.
Rear
Latches
4. To remove cover,
grasp the sides and pull
out.
End Cap
TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu
um, the agitator must be cleaned every time
the belt is changed.
The agitator must also be cleaned accord
ing to the following schedule:
Vacuum Cleaner Use Clean Agitator
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
IMPORTANT
every week
every month
every 2 months
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build
up frequently in the Power-Mate® agitator
and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator, or end caps.
16