Suggested pile height settings, Attachments, Caution – Kenmore 116.25513 User Manual
Page 10: Attachments on handle, Attachments on wands
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED PiLE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED - Medium to deep pile.
LO - Low to medium pile.
XLO - Most carpets and bare floors.
ATTACHMENTS
A
CAUTION
00 NOT attach or remove handle or
wands while vacuum cleaner Is ON.
This could cause sparking and dam
age the electrical contacts.
ATTACHMENTS ON HANDLE
NOTE: If the
Power-Mate* is
attached, turn
vacuum cleaner
off before
removing han
dle from wands.
1. Press handle
quick release
and pull up on
handle.
NOTE:
To assemble
dusting brush,
insert the fabric
brush into the
dusting brush
and press into
place.
2. Slide attachments
firmly on handle as
needed. See ATTACH
MENT USE CHART.
Dusting
Brush
Fabric
Brush
To remove,
press latch
and lift out.
Latch
ATTACHMENTS ON WANDS
1. To
remove
wands from
Power
Mate®, lock
wands in
straight-up
position.
Wand
Quick
Release
Pedal
2. Press wand quick
release pedal with foot
and pull the wands
straight up and out of
Power-Mate®.
The Power-Mate® plug
and cord do not have
to be removed to use
attachments on the
wands.
3. Put attach
ments on
wands as
needed. See
ATTACHMENT
USE TABLE.
10