beautypg.com

Power-mate® storage, Thermal protector, Performance indicator – Kenmore 116.25513 User Manual

Page 12: Stair grip, Power-mate jr* storage

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

POWER-MATE® STORAGE

The lower wand

has a "U” shaped

flange in the area
where the power
cord attaches. The

base has a “U"
shaped slot near
the front.

The flange allows

the wands and Power-Mate®to be stored

with the canister to conserve storage space.
The canister must be stored on end for this
feature to be used.

To attach the Power-Mate®, it must be in the
flat position as shown in the illusfa'ation. Use
the handle release pedal to place it in this

position.

The wand will slip out of the slot as it is lifted
up for use and will slide into the slot as it is
lowered for storage.

THERMAL PROTECTOR

This vacuum cleaner has a thermal

protector which automatically trips to protect

the vacuum cleaner from overheating. If a
clog prevents the normal flow of air to the

motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.

To correct problem: Turn the vacuum

cleaner off and unplug the power cord
from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reset. Check for and remove clogs, if

necessary. Also check and replace any
clogged filters. Wait approximately

thirty (30) minutes and plug the vacuum

cleaner in and turn back on to see if №e
motor protector has reset.

PERFORMANCE INDICATOR

Perhrmance

Indicator

When the unit

is running with
normal air flow,
the light on the
performance
indicator is off.
The light

comes on
whenever the

airflow
becomes
blocked. If that occurs, check the
disposable dust bag, motor safety filter
and other possible clog locations shown in
HOW YOUR VACUUM CLEANER

WORKS.

To correct problem: See the TROUBLE­

SHOOTING table.

Note: The light may also come on when
using attachments, due to reduced airflow

through the attachment.

STAIR GRIP

During normal operation white the vacuum
cleaner is in the horizontal position, the
caster wheel rotates freely 360'.

The Stair Grip feature
allows the caster
wheel to lock in
position when
the unit is
rotated 25“
from horizontal

into a vertical
position in order

for the vacuum

cleaner to rest on stairs.

12

This manual is related to the following products: