Stopping or interrupting a self-cleaning cycle, Press, Display – Kenmore 790.4802 User Manual
Page 28: Adjusting oven temperature, Instructions press, To adjust the oven temperature higher, To adjust the oven temperature lower, Adjusting the oven temperature, Seif-cleaning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Seif-Cleaning
INSTRUCTIONS
When the Self-Clean Cycle is Completed
The time of day, the
"DOOR LOCKED", "CLEAN"
and
"HOT"
icon will remain in the display.
Once the oven has cooled down for approximately 1 HOUR,
and the
"DOOR LOCKED"
icon is no longer displayed, the
oven door can then be opened.
1
.
2
.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press (sw
2. Once the oven has cooled down for approximately 1 HOUR,
and the
"DOOR LOCKED"
icon is no longer displayed, the
oven door can then be opened (Fig. 1).
PRESS
DISPLAY
Fig. 1
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment
is needed.
INSTRUCTIONS
PRESS
To adjust the oven temperature higher
1. Press for 6 seconds (Fig. 2).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) (^3^ (Fig. 3). The
temperature may be increased as much as 35°F
(19°C).
3. Press to accept the temperature change and the display will
necessary.
To adjust the oven temperature lower
1. Press (^Ba^ for 6 seconds (Fig. 4).
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) (^3^ and then press
(£) (Fig. 6). The temperature may be decreased as much as
35°F(19°C).
3. Press to accept the temperature change and the display will
return to the time of day (Fig. 7). Press to reject the change if
necessary.
28
CD®
start
;)
or
return to the time of day (Fig. 4). Press to reject the change if
(^Ba^
CD®
STARTS or
Note:
The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Fig. 4
Fig. 5
-
JU
Fig. 6
Fig. 7