To set control for continuous baking, To set control for oven lockout feature, Setting oven controls – Kenmore 790.9403 User Manual
Page 13: Cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
(cont’d)
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1.
Press ^ . "------------------- " appears in the display.
2.
Within 5 seconds, press the yV
or
'N/'. The display will show "350°F (177°C)." By pressing and holding the >V or
"V , the temperature can then be adjusted in 5°F increments (1 °C if the control is set to display Celsius).
3.
As soon as the yV or 'V' pad is released, the oven will begin heating to the selected temperature. When the
displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control
will beep 3 times.
4.
To cancel baking, press (S).
To Change the Oven Temperature after Baking has Started:
1.
Press Bake and make sure the bake temperature is displayed.
2.
Press the yv or'V' pad to increase or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1.
Press and hold (S) down for 5 seconds until tone is heard, "--------------------------
hr"
will appear in display for continuous cooking.
The current time of day will return to the display.
2.
To cancel the Continuous Bake function, press (™) and hold for 5 seconds until tone is heard.
"12hr"
will appear in
display indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control for Oven Lockout g
Lockout
The control can be programmed to lock the oven door and lockout the oven control pads.
To set Control for Oven Lockout feature:
1.
Press and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the
motor driven door lock will begin to close automatically.
DO NOT open the oven door
while the indicator light is
flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will
appear in the display.
2.
To cancel the Oven Lockout feature, press and hold for 3 seconds. The control will unlock the oven door and
resume normal operation.
Note: If any control pad is pressed while in the Oven Lockout mode, “Loc” will appear in the display until the
control pad is released. V T
7
7:
7
7
7
7
7
7
7
7
7
7
7
n
r"
13