Oven control functions, For a silent control panel, Temperature conversion – Kenmore 790.9403 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oven Control Functions
READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN.
For satisfactoryuse ofyour oven, becomefamiliarwith
the various pad functions of the oven as described below.
CLOCK SET
PAD— Used
to set the
time of day
COOK TIME
PAD— Used to
enter the length of
the baking time.
TIMER SET/OFF
PAD— Used to set
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also,
TIMER SET/OFF pad
is used to set the
Continuous Bake
feature.
UP and DOWN ARROW PADS— Used aiong
with the function pads to seiect oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, ciean time and minute timer.
BAKE PAD—Used
to seiect the bake
function.
• Otfssn
• Preheat
• Door Looked
ST9¡» Sata«
tar
dsn,
ClesH
LiJ IfKkui:
DELAY START PAD— Used
to set the desired start time
for baking & Self-Clean. May
be used with COOK TIME to
program a delayed bake
cycle.
OVEN, PREHEAT
&
DOOR LOCKED LIGHTS* —The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
FEATURE INDICATOR
LIGHTS— These light to
show which feature is in
use.
BROIL PAD— Used to
select the variable broil
function.
SELECTSELF-CLEAN
PAD— Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
STOP/CLEAR PAD—
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
*Note; The
OVEN
indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the -
preheat indicator light turns OFF, your oven is ready. ..................... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold (S). After
7
seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold (®) again for 7 seconds until the control beeps
once.
Note:
The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (GS^C to 287°C).
To change the temperature to
°C
(Celsius) or from
°C
to °F (control should not be in a Bake or Ciean mode):
1.
Press "------------------" appears in the display.
2.
Press and hold the >V until "FH" appears in the display.
3.
Press and hold until °F or °C appears in the display.
4.
Press the
or 'V'
to change
°F
to
°C
or
°C
to
°F.
5.
Press any control pad to return to normal operating mode.
11
rn