Conversion to liquefied petroleum, Gas (or l.p.), Grounding instructions – Kenmore 790.7890 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT
Operate the cooktop using
a 2-prong adapter or an extension
cord. If
a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with
a properly
grounded 3-prong wall receptacle installed by
a qualified electrician.
See the
INSTALLATION INSTRUCTIONS
packaged with this cooktop for
complete installation and grounding instructions.
Grounding
type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass
the grounding
prong.
Power supply
cord with 3-prong
grounding plug
ik WARNING
Th is appliance is equipped with
a
3-prong
grounding plug for your protection against shock hazard
and should be plugged directly into a properly grounded
receptacle.
DO NOT
cut or remove the grounding prong from
this plug.
ik WARNING
I
Avoid fire hazard or electrical shock.
DO
NOT
use an adapter plug, an extension cord, or remove
grounding prong from electrical power cord. Failure to follow
this warning can cause serious injury, fire or death.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
Only
a qualified service agent should perform the L. P.
conversion. Contact the local gas provider for conversion.
The L. P. Conversion Kit is supplied with this range and is
located on the main back of the range. The kit contains
installation instructions which must be read before and
followed carefully when installing the kit.
ik WARNING
______________ I To avoid serious injury, any additions,
changes or conversions required in order for this appliance
to satisfactorily meet the application needs must be made
by
a qualified service agent.