Kenmore 790.7890 - Manual (Page 15)

Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
Q
The loaouT pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be
locked individually.
____________________ INSTRUCTIONS________________________________PRESS_______________DISPLAY_______
To activate the Oven Lockout feature
Lower Upper
Press Oven or Oven. 1.
2
.
3.
Press and hold
LOCKOUT
for 3 seconds.
After 3 seconds, "DOOR", "LOCKED" will flash and "Loc" will
appear in the display (Fig. 1). Once the oven door is locked the
"DOOR" and "LOCKED" indicator will stop flashing and remain in
the display. Allow 15 seconds for the oven door to lock.
Oven or
Upper
Oven
for 3 seconds
o or
Fig. 1
To reactivate normal oven operation:
Lower Upper
1. Press Oven or Oven.
2. Press and hold io?™ui for 3 seconds. "LOC" will disappear from the
display. "DOOR" and "LOCKED" will flash in the display until the
oven door has completely unlocked.
2. The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower oven
can be used when the upper oven lockout feature is on.
Lower Upper
Oven or Oven
for 3 seconds
Setting Silent Control Operation
Delay Flex
The Start and Clean pads control the Silent Control operation feature. The Silent Control operation feature allows the oven
control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent
operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to silent control
operation
Delay ^ jj j, Delay
1. Press and hold start for 7 seconds (Fig. 2). After 6 seconds, bEEP start for 7 seconds
(On) will appear in the display (Fig. 3).
Flex
Press Clean to switch between normal sound operation (Fig. 3) and
silent operation mode (Fig. 4).
2
.
3. Press to accept the change or press to reject the change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if the
control is set to silent operation.
Flex
Clean
\STARrJ VSTOP/ Fig. 3
b E E P
Fig.
4
15