Kenmore 790.7890 - Manual (Page 14)

Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
Timer Flex ^ ^
The Set/ofT and Clean pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory
preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours
and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
INSTRUCTIONS PRESS DISPLAY
To set the control for Continuous Bake or 12 Hour Energy
Saving features
Timer
1. Press and hold Set/off for 7 seconds (Fig. 1). After 7 seconds "12Hr
OFF" or "STAY On" will appear in the display and the control will
beep once (Fig 2 or 3).
F!ex ^ ^
Press Clean to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12Hr OFF" (Fig. 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode
and "STAY On" indicates the control is set for the Continuous Bake
feature (Fig. 3).
2
.
3. Press V —' to accept the change (Fig. 4; display will return to time
of day) or press '—^ to reject the change.
Timer
Set/off for 7 seconds
Flex
Clean
Fig. 1
Fig. 3
Fig. 4
Setting Kitchen Timer
Timer
The Set/off pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep
when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the
other oven control functions, except during a self-clean operation. Refer to “Minimum and Maximum Control Pad Settings”
for time amount settings.
____________________ INSTRUCTIONS________________________________PRESS_______________DISPLAY______
To set the Kitchen Timer (example: 5 minutes)
Timer
1. Press Set/off {Fig. 5).
Press the number pads to set the desired time in the display
(example
5).
Press The time will begin to count down in the
display (Fig. 6). Note: If is not pressed the timer will return to
the time of day after 30 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Fig. 7). The clock will sound with 3 beeps every 7
Timer
seconds until Set/off ¡s pressed.
To cancel the Kitchen Timer before the set time has run out
Timer
Press Set/Off. The display will return to the time of day.
Timer
Set/Off
Timer
Set/Off
Fig. 5
Fig. 6
Fig. 7
To Set Add 1 Minute Feature
Add 1 Add Ì
The Minute pad is used to set the Add 1 Minute feature. When the Minute pad is pressed, 1 minute is added to the Minute Timer
. . , . . . . . Add 1 _ _
feature if this feature is already active. If the Minute Timer feature is not active and the Minute pad is pressed, the Minute
Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the
Minute Timer feature see To Set the Minute Timer instructions above.
14