Check filter, Drying, Cooling – Kenmore ELITE 796.7927# User Manual
Page 20: Q clean the lint filter, Q load the dryer, O turn on the dryer, O select a cycle, Select cycle modifiers, Select cycle options, Begin cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE
OPERATING THE DRYER
m
z
o
r
(7)
Normal |
Bulky/Bedding |
Casual I
Heavy Duty |
Towels I
Sanitize [
POWER
r \
I Workout Wear
I Small Load
I Delicates
I Express Dry
I Touch Up
I Air Dry
1
Rack Dry
i'iiOtIfjfRS;"
Temp
ii
Dry Level
It
Timed Dry
i More Time |
1 My Cycle Ii
1 Less Time |
i Wrinkle G
1
Easy Iron j
1 Static Shield j
1
Damp Dry Signal |
1 Chim' ■■
Drum Light |
i Control Lock 1
START/PAUSE
Check Filter
Drying
Cooling
Q CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the
filter and remove the lint from the last load. This will
help ensure the fastest and most efficient drying perfor
mance.
Q
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If
the load is extra large, you may need to divide it into
smaller loads for proper performance and fabric care.
O TURN ON THE DRYER
Press the POWER button to turn on the dryer. The
cycle LEDs will illuminate and a chime will sound, if
turned on. Referto page 19.
O SELECT A CYCLE
Turn the Cycle Selector Knob either direction until the
LED for the desired cycle is on. The preset tempera
ture, dry level, and option settings for that cycle will be
shown. Refer to page 21.
©
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be
changed if desired. This can be done using the cycle
modifier buttons as shown on page 24 (temperature,
dry level, timed dry and chime).
NOTE:
Not all options or modifiers are available on all
cycles. A different chime will sound and the LED will not
come on if the selection is not allowed.
SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons
as shown on page 25 ~ 26 (wrinkle guard, static shield
and control lock).
NOTE:
Not all options or modifiers are available on all
cycles. A different chime will sound and the LED will
not come on if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle.
The cycle can be paused at any time either by open
ing the door or by pressing the START/PAUSE button.
If the cycle is not restarted within 4 minutes, the dryer
will shut off and the cycle settings will be lost.
END OF CYCLE
When the cycle is finished, the chime will sound if it is
set. Remove your clothing from the diyer immediately
to reduce wrinkling. If Wrinkle Guard is selected, the
dryer will tumble briefly every few minutes to help pre
vent wrinkles from setting in the clothes.
20