A warning – Kenmore ELITE 796.7927# User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION INSTRUCTIONS
LEVELING THE DRYER
A WARNING
m
z
o
•
Wear gloves during installation.
• Failure to follow these instructions can result
in injury.
• The appliances are heavy. Two or more people are
required when installing the dryer.
There is a risk of serious back injury or other injuries.
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize vibration,
noise, and unwanted movement, the floor must be
a level, solid surface.
NOTE:
Adjust the leveling feet only as far as necessary
to level the dryer. Extending the leveling feet more than
necessary can cause the dryer to vibrate.
O Position the dryer in the final location. Place a level
across the top of the dryer.
• All four leveling feet must rest solidly on the floor.
Gently push on the top corners of the dryer to make
sure that the dryer does not rock from corner to corner.
Use a wrench to turn the leveling feet. Turn the leveling
foot clockwise to raise the dryer; turn the foot counter
clockwise to lower the dryer. Using a level, adjust the
foot until the dryer is level from side to side and front to
back. Make sure all 4 foot are in firm contact with the
floor.
NOTE:
Be careful when moving the dryer into it's final
location. Do NOT crush the duct. Make sure the
connections do not come loose.
16