Kenmore ELITE KING SIZE 73932 User Manual
Features, Benefit, Огуомг benefit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E L I T E
KING SIZE"" CAPACITY DRYER
Stock Nos. 63932 (Elec.) & 73932 (Gas)
Features -
Become familiar with all features before using
your dryer. Refer to your Owner’s Manual for
feature details.
Cycle Selector Control
(Timer)
• EVENHEAT™ with Auto
Moisture Sensing Plus
• TIMED DRY
• TUMBLE FREE™
HEATED DRYER RACK
О WRINKLE GUARD*
e
I I
5 FABRIC CARE/
Temperature settings for
additional clothing care
O End-of-Cycle SIGNAL
(adjustable tone)
0
PUSH TO START
Button
3979544
9/01
^ Lint Screen
О
Model and Serial No.
Plate
Ф Drum Light
Ф TUMBLE FREE™
Heated Dryer Rack -
for gentle care of
special fabrics
Ф EZ Loader Hamper
Door
Additional Features
•QUIET
РАКИ™
Plus
Sound Insulation for
extra-quiet operation
• KING SIZE™
fewer loads
Capacity for
Your dryer has features that may vary from those described in
your Owner's Manual. These features are illustrated and
described on this sheet. Refer to your Owner’s Manual for
general operating instructions.
EVENHEAT™ with Auto Moisture
Sensing Cycle
for your
Benefit
Proper use of the EVENHEAT™
with Auto Moisture Sensing
Plus cycle will dry your
clothes faster and at lower
temperatures.
This cycle takes the guesswork out of
drying. Dryness is determined by an
electronic sensor that “feels” the
amount of moisture in clothes as they
pass over it. Once the cycle starts,
the sensor automatically adjusts the
drying time based on the size of the
load and the types of fabric being
dried. As a result, you get more pre
cise drying temperatures and clothes
dry faster.
The EVENHEAT™ drying system
uses a solid-state sensor to prevent
the large variations in drying
temperatures that occur in most
other dryers. More consistent, even
heat in every cycle results in better
fabric care by shortening drying
times and by maintaining lower
drying temperatures.
More about EVEN HEAT“ with Auto
Moisture Sensing Plus
• When the Cycle Selector Control (Timer) is
set to NORMAL DRY *, and has run
through a full drying cycle, you can feel the
dried clothes and determine if they are more
damp than you would like.
If the load is too damp, you can use the
TIMED DRY cycle to dry the clothes
further. The next time you do a similar load,
move the timer toward MORE DRY.
If the load is overdried at the end of the
cycle, you can move the timer toward DAMP
DRY the next time you do a similar load.
NOTE; For very small loads (3-4 garments)
use the TIMED DRY cycle for best results.
You can use the FABRIC CARE/ Temperature
Control with a setting that is appropriate for
your load.
When to Use DAMP DRY
for your
Benefit
Selecting DAMP DRY helps shorten
drying times for items you would
normally hang dry.
Some fabrics will shrink if dried in a clothes
dryer. Selecting DAMP DRY gives you the
benefit of electronic moisture sensing.
Clothes are dried with heat for a brief time so
most of the moisture is removed. However,
the drying cycle stops while the clothes are
still damp to prevent overdrying. As a result,
fabrics retain the proper amount of moisture
so they will not shrink.
When to Use the TUMBLE FREE™
Heated Dryer Rack
for your
Benefit
The dryer rack gives you
concentrated airflow for efficient and
uniform drying. It also reduces noise
when drying items that have buckles.
Use the heated drying rack with the TIMED
DRY cycle only. This allows you to machine
dry items for a specific length of time without
tumbling.
FABRIC CARE/Temperature Control
/огуомг Benefit
Proper use of this control helps
ensure that fabrics are dried at the
right temperature for maximum life.
Use this contro! to select the drying
temperature that matches the fabrics in
your load.
• For hand washed or delicate items, select
the ULTRA DELICATE setting. This setting
will not exceed a maximum drying
temperature of 140°F (60°C).
NOTE: Not all hand washable garments
can be dried in a dryer. Check the care
label on all hand washable garments to
determine whether or not they can be
machine dried.
■ For a description of garment types and
temperature settings, refer to your
Owner’s Manual.
“Smart,” Temperature-Sensing COOL
DOWN Period
Once the selected level of dryness is
reached, the dryer goes into a cool down
period lasting 1-10 minutes. Unlike other
dryers which provide a fixed 10-minute cool
down, this “smart” cool down period is based
on the temperature of the clothes in your
load and varies the time accordingly.
• For small loads or loads that are dried at a
lower temperature, the cool down period
will be reduced to as low as one minute.
• For large loads or loads that are dried at a
high temperature, the cool down period will
be closer to 10 minutes.
TOTAL CARE™ SYSTEM
The exclusive TOTAL CARE™' SYSTEM
combines the KING SIZE™ load capacity,
EVENHEAT™, WRINKLE GUARD® II, and
the TUMBLE FREE™' Heated Dryer Rack to
ensure total drying care for any type of fabric
and load size.