beautypg.com

Locking controls, Estimated time remaining, Preset cycle settings – Kenmore 110.4292 User Manual

Page 14: Sanitary, Whitest whites, Heavy duty, Normal/casual

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Locking controls

The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for Pause/Cancel and Start.
You can lock the controls while the washer is operating.

To lock the controls
Select and hold DRAIN/SPIN for 3 seconds.

D

rain

/ S

pin

PRESS & HOLD 3

SECONDS TO LOCK /

UNLOCK CONTROL

The CONTROL LOCKED status light glows.

To unlock the controls
Select and hold DRAIN/SPIN for 3 seconds until the CONTROL

LOCKED Status light turns off.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing oocurs or the load is unbalanoed.

Wash Cycles

Choose Wash Cycles by selecting the button next to the desired
cycle. Each cycle is designed for different types of fabric and soil
levels.

W

ash

C

ycles

E

xpress

W

ash

N

ormal

/

CASUAL

H

eavy

DUTY

W

hitest

WHITES

W

ool

S

anitary

U

ltra

HANDWASH

Each cycle has a preset Soil Level (cycle time), Water

Temperature, Spin Speed and may have preset Options. The

preset settings provide the recommended fabric care for the
selected cycle.

The preset settings can be changed anytime before START is

selected. Not all Options and Modifiers are available with all
Cycles. (To change settings after the cycle has started, select
PAUSE/CANCEL, then select the desired settings. Select and
hold START [for approximately 1 second] to continue the
cycle.)

Preset cycle settings

Each cycle has a preset Cycle Time, Water Temp, and Spin
Speed. The preset settings provide the recommended fabric care

for the selected cycle. See chart.

Cycle

Soil Level
(hr:min)

Water Temp

Spin Speed

Sanitary

Heavy
(2:00)

Extra Hot/Cold

Extra High

Whitest
Whites

Heavy
(1:10)

Hot/Cold

Extra High

Heavy
Duty

Heavy
(1:35)

Hot/Cold

Extra High

Normal/

Casual

Normal
(0:45)

Warm/Cold

High

Express

Wash

Light
(0:30)

Warm/Cold

Extra High

Delicate

Normal
(0:35)

Warm/Cold

Low

Silk

Normal
(0:30)

Cold/Cold

No spin

Wool

Normal
(0:35)

Cold/Cold

Low

Ultra
Handwash

Normal
(0:35)

Cold/Cold

Extra Low

Sanitary
Use this cycle to clean heavily soiled colorfast fabrics. This cycle
combines a very hot water temperature and fast-speed tumbling
to help ensure the removal of heavy soils and stains. It is
recommended that you set your hot water heater to 120°F (49°C)
to ensure proper performance during this cycle. The Sanitary
cycle also helps eliminate 99.999% of 3 common infectious
bacteria, even when no bleach is used. Extra high speed spin
helps shorten drying time.

Whitest Whites
This cycle is especially designed for cleaning loads of soiled
white fabrics with the addition of bleach. Hot washing
temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer
wash time, and extra high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and
normally soiled garments. This cycle combines fast-speed

tumbling, longer wash time, and extra high speed spin to shorten
drying times. If the water temperature is lower than needed for
this cycle, the heater will warm the water to the optimum
temperature.

NOTE: Stain Treat is a default option for this cycle. To ensure
best performance, the water is heated as the cycle progresses.

This gradual heating assists in the removal of organic soils such
as blood. Stain Treat must be turned off to change the modifiers.

Normal/Casual
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press
blends, cottons and linens, and synthetic fabrics. This cycle
combines medium-speed tumbling, high-speed spin, and a load
cooling process to reduce wrinkling.

14

This manual is related to the following products: