Setting the controls (contd.), T zhhc tl, You see – Kenmore Sens-A-Clean 665.95829 User Manual
Page 40: Example shows sensor setting) you see, C - j l f tu, When pressing any pad) you see, Uu lit, When opening the door), Press, Bt nb
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■
m ' - i ]
SETTING THE CONTROLS (contd.)
i 5.
Press START7ENTER.
PRESS
The door will lock as soon as you press
START/ENTER.
STABT
ENTER
6
.
Once Delay Start time has been reached, the
oven begins the SENS-A-CLEAN^'^ Self-Cleaning
cycle.
YOU SEE
t ZhHC
t L
LOCKED CLEAN
YOU SEE
bt nb
7.
After the SENS-A-CLEAN Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
(example shows sensor setting)
YOU SEE
C
-
J
L f tU
8
.
Press any pad to remove “End” and bring back
time of day; or open door, at which time “door”
will be displayed. Then close door and time of
day will appear in display window.
YOU SEE
h j n
I* JU
9.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or
sponge. If needed, touch up spots with a mild
abrasive cleanser or cleaning sponge.
(when pressing any pad)
YOU SEE
J- - -
U U L i t
(when opening the door)
Press OFF/CANCEL.
PRESS
OFF
CANCEL
YOU SEE
C Ü o '
ÍPÑI
LOCKED
If the oven temperature is too high for you to
immediately open the door when you press
OFF/CANCEL, “cin,” ON, “cool,” and LOCKED will
appear on the display until the oven cools; then
“End” will appear and the door will unlock.
C
-
J
L f lU
40