Starting/canceling a function, Ultrabake™ baking/roasting, Press – Kenmore Sens-A-Clean 665.95829 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/665382/18/background.png)
STARTING/CANCELING A FUNCTION
START
After setting a function, you must press START/
ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, "START?” wiii show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of setting, the time
of day will appear. You must reset the function and
press START/ENTER.
OFF/CANCEL will cancel any function except the
Clock, Timer, or Oven or Cooktop Lockouts.
When you press OFF/CANCEL. the display
will show the time of day or, if the minute
timer is also being used, the time remaining.
Off
CANCEL
ULTRABAKE™ BAKING/ROASTING
Your oven is designed with the ULTRABAKE
enhanced baking system to constantly monitor
oven temperature. The bake and broil elements
will cycle, as needed, to maintain the desired
temperature. This feature is automatically activated
when the oven is in operation.
IMPORTANT: Never place food or cookware
directly on the oven door or the oven bottom.
1. Place the STURDIGLIDE™ rack(s) where you
need them in the oven. For more information, see
the “Positioning racks and pans” section, p. 12.
2.
Press BAKE.
PRESS
BAKE
3.
Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press TEMP (▲) or
(T)
pad(s)
to raise or lower the temperature in 5®F amounts.
Use these pads until the desired temperature
shows on the small display.
PRESS
TEMP
A
YOU SEE
n r
C *
J J U
f
J ' J U
bak
:
YOU SEE
.....
»»I
f
J ' J U
BAKE
(example for bake at 375°F)
18