N i fl?;uu, Example for 12:00) you see, Example for 5:30) you see – Kenmore Sens-A-Clean 665.95829 User Manual
Page 15: C'jn, Using the oven lockout, Setting the clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE CLOCK
1. Press CLOCK.
PRESS
0
YOU SEE
(denotes blinking)
/
n
i
f L ? ; U U
2.
Set the time.
Press the HOUR/MIN (▲) or
(T)
pad{s) until the
correct time of day shows on the display.
(example for 12:00)
YOU SEE
C-rOn
3.
Press START/ENTER or CLOCK.
NOTE: This is a 12-hour clock and does not
show a.m. or p.m.
PRESS
STMT OR
ENTER
(example for 5:30)
YOU SEE
0
C ' j n
USING THE OVEN LOCKOUT
The oven lock lets you prevent use of the control
panel command keypads. This feature comes in
handy when cleaning the control panel to avoid
accidentally turning on the oven.
NOTE; You can only lock the oven when the oven
is not in use or the control has not been set. The
oven will remain locked after a power failure if it
was locked before the power failure.
To lock the oven:
Press and hold the OVEN keypad for 5 seconds.
•'O You will hear a single tone and “Loc” and
e
Q will appear on the display. Three tones
will sound when the oven is locked and
you press any command pad other than
HssEc CLOCK, TIMER, START/ENTER,
OFF/CANCEL, TOP or OVEN.
To unlock the oven:
Press and hold the OVEN keypad for 5 seconds.
I'O You will hear a single tone and “Loc” and
0
6 will disappear from the temperature
display.
0SSEC
15