Electrical, Helpful tip – Kenmore 9744231 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1.
A.
Disconnect the power supply. Turn
water off.
2
.
Put on gloves and safety glasses
If you are replacing a
dishwasher;
✓ check that the water line
Q
reaches
to the front left of opening where the
water connection will be made
✓ check that the direct wire © reaches
to the front right of opening where
the electrical connection will be
made
If the water line and the direct wire
reach into the opening far enough, go to
step 10, page 11.
If you are installing a new
dishwasher, complete all of
the following steps:
Electrical
Follow all national and local codes and
ordinances for completing electrical
supply to cabinet.
If you are:
use steps:
direct wiring
3,4 and 5
using a power supply cord
3a and 4a
HELPFUL TIP:
Wiring the dishwasher will be
easier if yott route wire into the
cabinet opening from the ri^t
side.
continued on page 9
8