Tools and materials needed, All installations, In addition for new installations – Kenmore 9744231 User Manual
Page 3: Parts supplied
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tools and
materials needed
All installations
O ®
®
A. pliers
B. Phillips screwdriver
C. 5/16" and 1/4" nut
drivers or hex
sockets
D. measuring tape or
ruler
E. 10" adjustable
wrench that opens to
M/r (23cm)
F. flat-blade
screwdriver
G. gloves
H. utility knife
I. 2 twist-on wire
connectors which
are the proper size
to connect your
household wiring to
16-gauge wiring in
dishwasher
J. small level
K. safety glasses
L. 90" elbow with 3/8"
N.P.T. external
threads on one
end. (The other end
must tit your water
supply line.)
M. flashlight
N. Teflon™ tape or
pipe joint
compound
O. shallow pan
o
©
In addition for new installations
V. clamp connector or
conduit connector to
fit a 7/8“ (2.2cm)
diameter hole
P. electric drill with
Q. 1/r. 3/4" and
1'1/?‘ hole saw bits
R. small tubing cutter
S. wire stripper
T.
1-1ff"-2"screw-^pe
clamp if connecting
to waste-tee
U. copper tubing (3/8"
recomnoended)
Parts supplied
A. 2 drain hose clamps
B. 2 No. 10x1/2"
Phillips-head screws
C. drain hose
0
Make sure all these parts are included.
—p-. See parts list for accessories available tor your
aJ dishwasher.