beautypg.com

To operate suction control slide, Caution – Kenmore 116.32289 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Remove the
telescoping

wand from

its storage
position.

Remove the crevice tool from its storage

position in the wand. Turn the locking ring to
the UNLOCK position. Extend the wand to
its full length Turn the locking ring to the
LOCK position. Attach the extension wand
onto the open end of the hose.

TO OPERATE SUCTION CONTROL
SLIDE

TELESCOPING WAND

When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This slide is located on
the telescoping wand, close to the hose.

This will reduce suction for ease of
cleaning.

Lower

Wand

Wand

Locking Ring

Suction

Control

Slide

Upper
Wand

Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.

To achieve maximum reach with the attach­
ments, add the crevice tool to the end of the
wand by inserting and twisting slightly.

placed on the crevice tool
reach.

for additional

CAUTION

When using attachments, be careful

not to overextend the stretch hose

when reaching. Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over.

NOTE:
Return the
suction con­
trol slide to

the closed

position for
normal clean­
ing.

This manual is related to the following products: