Warning, Exhaust filter cleaning – Kenmore 116.32289 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Unfold the new dust
bag.
Insert the dust bag
completely onto the
dirt tube by holding
the bag collar.
Snap the dust bag
collar into position.
Be sure the bottom of dust bag is com
pletely within the dust bag cavity prior to
replacing the bag cover.
Position the
bag cover so
its position
ing tab fits
into the body
positioning
slot. Close
the bag
cover.
Bag
j
Cover I
Beg -
Cover
Body
Positioning
Slot
Bag Cover
Positioning Tab
You will hear a
snap when the
cover is secure
ly closed.
EXHAUST FILTER CLEANING
WARNING
Do not operate without exhaust
filter.
The exhaust filter must be replaced when
dirty. It should be replaced regularly
depending on use conditions.
The filter CANNOT be washed as It will
lose its dust trapping ability.
Check filter frequently.
Press the handle
release pedal to
let the upper por
tion of the cleaner
lay back against
the floor.
HandlB
Release Pedal
Grasp the air
exhaust panel
with a hand on
each side,
press inward
and pull the
panel forward,
Slits
Replace the
electrostatic
fitter, carefully
positioning it
so the slits fit
around the
four raised
pins.
Pins
When
installing
the exhaust
filter make
sure the
white side
of the filter
is against
the exhaust
panel.
Slits
White Side
Against Exhaust
Panel
Exhaust
Filter
Exhaust
Panel
Replace the
exhaust panel.
Return the cleaner
to the upright posi
tion.
15