Dust bag changing, To replace bag, Warning – Kenmore 116.32289 User Manual
Page 13: Caution, Remove bag
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DUST BAG CHANGING
TO
REMOVE BAG
f \ laiMt 1V i
\a0
V in»
A
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Press the
release button
located on the
top of the bag
cover.
Release
Button
Cover
Puli the bag
cover forward.
Remove and
lay aside,
Grasp the dust
bag collar and
pull gently, care
fully removing the
dust bag.
Throw away the
used dust bag.
Do not reuse.
A
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is
full. Change bag more often when
vacuuming these materials.
Dirt Tube/
Bag Holder
Bag
Cavity
Motor
Safety
Filter
TO REPLACE BAG
Check the dust
tube and the
motor safety
filter.
If either is
blocked, check
the TROUBLE
SHOOTING
chart
Dust Bag
Safety
Seal Tab
Fold the safe
ty seal tab on
the new dust
bag away
from the
opening that
fits on the
dust tube.
NOTE: See PARTS AND FEATURES for
Dust Bag number.
Unfold the new dust bag.
Insert the dust bag
onto the dirt tube
completely by
holding the bag
collar. Snap the
dust bag collar
into position.
Be sure bottom of dust bag is completely
within dust bag cavity prior to replacing
the bag cover.
Position
the bag
cover so
its posi
tioning tab
fits into
the body
positioning
slot.
Bag
Cover I
Bag
Cover
Body
Positioning
Slot
Bag Cover
Positioning Tab
13
Close the bag
cover.
You will hear a
distinct snap
when cover is
securely closed.