Light bulb changing, Warning, Caution – Kenmore 116.32289 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIGHT BULB CHANGING
A
WARNING
Injury
Electrical Shock Or Personal
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from cleaner suddenly starting.
Disconnect the power cord from the elec
trical outlet
Press the handle release pedal to let the
upper portion of the cleaner lay back
against the floor.
Remove
the base
plate as
outlined in
the BELT
CHANG
ING AND
AGITATOR
CLEANING
section.
CAUTION
Do not use a bulb rated over 15W
(130V). During extended use, heat
from the bulb could overheat sur
rounding plastic parts.
Grasp the
bulb socket
assembly
and while
gently rock
ing it from
side to side,
pull it up out
of the noz
zle housing.
Bulb Socket Assembly
To Release
Remove the light
bulb by pushing
the bulb in while
turning counter
clockwise to
release from the
slot.Then pull the
light bulb straight
out.
To replace the light
bulb, carefully insert
and turn clockwise
to securely fit into
slot.
NOTE: See PARTS
AND FEATURES
for bulb number.
CAUTION
Do not plug in or turn on until the
vacuum is completely reassem
bled.
Replace the base plate as outlined in the
BELT CHANGING AND AGITATOR
CLEANING section.
20