Install lighting stick and grease draining tray, Install left side shelf and side burner frame – Kenmore 141.16322 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Install Lighting Stick and Grease Draining Tray
□
Attach the Lighting Stick to the Left Bowl
Support Bracket using screw S132IVI04082.
□
From the back, slide the assembled Tray side
tabs (with Draining hole postion to the right)
over side rails underneath the Grill Bowl.
□
Install the Grease Receptacle under Grease
Draining Tray from the back of grill.
Lighting Stick
Qty. 1
Part # P05313023B
Pattern
Head
Screw
M4x8mm
Qty. 1
Part # S132M04082
Grease Receptacle Grease Draining Tray
Install Left Side Shelf and Side Burner Frame
□
Insert the 3 screws S132G04122 half-way into
holes on upper rim Bowl Panel (See Figure 1
&
2
).
□
Align the
Left
Side Shelf keyholes with the 3
screws (See Figure 3) and tighten the 3 screws
securely from the underside of Side Shelf.
□
Insert the 2 screws S132G04122 into threaded
Figure 1