Cisco 1751 - Manual (Page 27)

1-11
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Chapter 1 Cisco 1751 Router Overview
Unpacking the Router
Unpacking the Router
Table 1-5 lists the items that come with your router. All these items are in the
accessory kit that is inside the box that your router came in.
Additional Required Equipment
Depending on your local network and which Cisco WICs and VICs you install in
your router, you might need other items listed in
Table 1-6 to complete your router
installation.
Table 1-5 Router Box Contents
• Power cord (black)
• Power supply
• DB-25 to DB-9 adapter
• Console cable, RJ-45 to DB-9 (light blue)
• Product documentation
Table 1-6 Additional Required Equipment
Equipment When You Use It
Ethernet hub A hub connects pieces of network equipment (including the router)
to create a network. You can use a 10-, 100-, or 10/100-Mbps hub
with the router.
Ethernet switch A switch connects pieces of network equipment (including the
router) to create a network. You can use a 10-, 100-, or 10/100-Mbps
switch with the router.
Phillips screwdriver Although the WICs and VICs use thumbscrews, you might need a
Phillips screwdriver to loosen the WIC and VIC cover.
Cisco WIC To make a WAN connection, the router must have a supported WIC
installed. The router supports up to two cards. You can either order
the cards when ordering the router, and they will be installed for
you, or you can order the cards separately, after receiving the router,
and install them yourself.