GE 2-9975 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

7. Snap the base plate into place.

8. Feed the extra phone cord back

into the base plate.

9. Slip the mounting holes over the

wall plate posts and slide the unit

down firmly into place.

(Wall plate not included.)

10. Rotate the handset hook one-half

turn (180“).

11. Plug the handset cord into the

handset and into the unit, and

then hang up the handset.

12. Set the TONE/PULSE switch

(located on the left side of the
unit) to TONE if you have touch-

tone service, or to PULSE if you

have rotary dial service.

13. Plug power supply adapter

into an AC outlet.

(It)

^.iT)

NOTE: Use only the Thomson 5-2380 power supply that came with

this unit. Using other adapters may damage the unit.