GE 2-9975 - Manual (Page 11)

1. Press and hold the LINE 1 or LINE 2
ANNOUNCEMENT button. (You
need to hold the button until you
finish the announcement.)
2. Begin talking after you hear the
tone. You have 15 seconds to
complete the announcement.
3. Release the button when you finish
the announcement.
D
efault
O
utgoing
A
nnouncement
If you do not want to create your own outgoing announcement, you can
use the default announcement, Please leave message after tone. To use
the default announcement:
1. Press and hold the ANNOUNCEMENT LINE 1 or LINE 2 button.
2. Release the button when you hear the tone.
NOTE: The display will blink if you do not record an outgoing
announcement or choose the default announcement for each line. It
stops blinking once announcements are recorded for each line.
R
eviewing
A
n
O
utgoing
A
nnouncement
You can review an outgoing announcement by pressing and quickly
releasing the LINE 1 or LINE 2 ANNOUNCEMENT button.
T
ape
B
ackup
When you record the outgoing announcement, the tape also records
your announcement. In the event of a power failure, the unit automatically
re-records the announcement from the tape when power is restored.
/----------------------------------------------------------------------------------------------------------- \
TIP; For best sound quality of the outgoing announcement, re-record
the announcement if power is lost.