GE 2-9975 - Manual (Page 26)

A
nswerer
O
peration
S
olutions
Problem Solution
Can't hear messages,
beep, etc.
• Adjust speaker volume (p. 7).
Time/Day Stamp is stuck
at 12 a.m. Monday
• Set the Tlme/Day stamp (p. 8).
Doesn't answer, or
answers on 10th ring
• Make sure answerer is turned on (p. 17).
• Tape is full, reset messages (p. 18)
• Check AC power and phone line connections.
Incoming messages
are incomplete
Extension was picked up?
Tape is full (p. 18).
Accidentally pressed STOP button during playback
and stopped message.
You may get some voice at the end, from a
message that was not completely recorded over.
Won't respond to
remote commands • Must use touch-tone phone.
• Did the unit hang up? If you take no action for a
period of time, it automatically hangs up.
Outgoing Announcement • Re-record the announcement (p. 9).
is unclear - Make sure you are about 6 inches from the
microphone (located on the front of the unit).
- Eliminate background noise.
Answerer won't respond • Unplug power cord from the back of the unit and
plug it back in to reset the answerer.
• Make sure answerer is on.
■ Make sure line selected switch is set correctly (p. 7|
"Fon" is flashing in the • Message forward was stopped. Need to turn it
display back on (p. 19).
24