GE 2-9975 - Manual (Page 5)

I
nstallation
O
ptions
Although you can use your GE 2-line answerer with a single phone line,
you must have two lines (separate phone numbers) to use a two-line
system. The following diagrams show two possible systems:
2 Lines on a Single Modular Jack
One type of two-line phone system uses
a single RJ14 modular jack which
contains both phone lines. Connect the
gray phone cord to the Ll+2 jack located
on the back of the phone.
Each Line on a Separate Modular Jack
If you have two separate phone jacks,
each with its own line, connect the
black phone cord to the L2 jack, and
connect the gray phone cord to the
Ll+2 phone jack located on the back
of the phone.
NOTE: Connect the Gray phone
cord to the outlet that you want to
be line one.
I
nserting a
T
ape
Open the tape compartment and
gently insert a tape with the top of
the cassette to the the right (make
sure that Side A is showing).
Don't force the tape into position—
it could damage the unit.
Line 1 line 2
•
(?)
i—
*?r-
y
________ Cr-agli-
Gray phone cord
7