Canon 800 - Manual (Page 9)

– 7 –
Important Warnings
WARNING
● Always observe these warnings when using the
scanner. Failure to follow these warnings could
result in injury due to fire or electric shock.
● Do not set up the scanner in a location close to
flammable solvents such as alcohol and paint
thinners.
● Do not cut, damage or modify the power cord, do not
pull or bend the power cord excessively, and do not
place heavy objects on the power cord.
● Never plug in or unplug the power cord with wet
hands.
● Do not place objects on top of the scanner as such
objects could fall and cause injury. Do not plug the
scanner into a multi-socket adapter.
● Do not knot or bundle the power cord, and ensure
that the plug is pushed fully into the power outlet.
● Use only the power cord supplied with the scanner.
● Do not attempt to disassemble or modify the scan-
ner. There are no user-serviceable parts inside the
scanner.
● Do not use flammable sprays or aerosols near the
scanner.
● Switch the scanner off and unplug the power cord
before cleaning the scanner.
● To clean the unit, use a cloth lightly dampened with
water or a mild detergent.
● If the scanner emits an unusual noise, odor, smoke or
sparks, or if the scanner will not function when
switched on, immediately switch the scanner off,
unplug the power cord and contact an authorized
Canon dealer or service center.
● Before you move the scanner even a short distance,
switch the scanner off and unplug the power cord.
Before You Begin...