Canon 800 - Manual (Page 38)

– 36 –
Setting the Date and Time
When the date and time are added to the scanned image in
Reader Printer mode, the date and time added are those set
internally on the scanner by this function. This section
describes how to set and check the date and time.
● Setting the Date and Time
1 Hold down the Clear key and the Negative/Positive key
for 2 seconds. The year figure blinks on the display and
you can start setting the date and time.
2 Check that the lamp at the left end of the brightness
indicator is blinking and then press the plus (+) or
minus (-) key to set the year.
Display Setting
~ 1951 to 1999
~ 2000 to 2050
3 Press the brightness adjustment key ( ) to display the
month and then use the plus (+) and minus (-) keys to
set the month.
Display Setting
~ January to December
4 Press the brightness adjustment key ( ) to display the
day and then use the plus (+) and minus (-) keys to set
the day.
Display Setting
~ 1st to 31st
5 Press the brightness adjustment key ( ) to display the
time (24-hour format) and then use the plus (+) and
minus (-) keys to set the hour.
Display Setting
~ 00 to 23
+
AE