Canon 800 - Manual (Page 32)

– 30 –
Functions that Can Be Assigned to the
Function Keys
The functions described below can be assigned to a func-
tion key.
● Assign all settings
This function stores the operation panel status and all
the scan settings.
● New file
After you have pressed this key, the scanned image is
saved into another file (folder). For the details, see the
Users’ Manual for your application.
● Raise screen brightness
This function raises the screen brightness.
● Lower screen brightness
This function lowers the screen brightness.
● Standby (default setting: F6)
Sets the equipment to Standby state. Projection on the
screen will be turned off, and standby display will
appear. You can release the standby state by pressing
the key again or by operating other key.
● Rotate 90
°
right (default setting: F2)
This function rotates the screen image 90
°
to the right.
● Rotate 90
°
left (default setting: F3)
This function rotates the screen image 90
°
to the left.
● Automatic skew correction
This function corrects a skewed image during scanning
so that it is scanned straight. However, if “for Positive
film” (
) is selected as the film polarity (➜P.23), the
Auto Deskew Image function does not operate.
● Add on (default setting: P1)
Pressing this key imprints the add on specified on the
scanner (➜ P.33) or specified in the application on the
scanned image. Refer to the user manual supplied with
the your application software for information on the
application add on settings.
Special Features
;;;;
;;;;
;;;;
;;;;
;;;;